You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Missing information on sign

Reported via desktop in the Sign missing/defective category anonymously at 19:43, Thu 7 September 2023

Sent to Shropshire Council less than a minute later. Council ref: 14122100.

The missing information is a "No through road" symbol considering Carmen Avenue is a cul-de-sac only accessible from the junction with Portland Crescent. This is potentially confusing to drivers unfamiliar with the area also considering that the other end of the street cannot be seen from the junction and all but one of the other cul-de-sacs in the area have the required symbol on their signs. Judging by the close-up of the sign I supplied, the sign is in need of replacement anyway from its condition providing the opportunity to add a sign with the required symbol. If a replacement is not necessary, the required symbol could be provided by fixing a plate onto the existing sign's supports.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for contacting us. This note is to confirm that we have received your report and we'll be in touch with an update as soon as possible.

    Posted by Shropshire Council at 19:43, Thu 7 September 2023

  • Thank you for informing us and we have noted your concern unfortunately due to financial resection and this not a safety issue we we can not action replacement at this time only when sign at end of life we will replace with correct instructions. Thank SC tec

    Posted anonymously at 10:14, Thu 14 September 2023

  • We have looked into the matter you reported and our investigation shows that no further action is required at this time.

    State changed to: No further action

    Posted by Shropshire Council at 10:17, Thu 14 September 2023

This report is now closed to updates from the public. You can make a new report in the same location.